Premium white direct thermal labels measuring 4″ x 6″. Direct thermal media prints without a ribbon, using a heat-sensitive coating, making it ideal for shipping labels and short-to-medium-term applications. BPA/BPS free, with a permanent adhesive on smooth matte paper.
Features
No ribbon required
Fast printing for high-volume runs
Lower cost per label on short-term jobs
Permanent adhesive standard, freezer-grade available
Applications
Shipping and e-commerce fulfillment, plus other short-term and barcode labeling.
Specifications
SKU DT-RL-0400x0600-WHI-1527
Drawn from this product’s own dimensions. The core is shown to scale within the roll; the two views are not to scale against each other, or against other products.
Label specifications
Label width
4" / 101.6 mm
Label height
6" / 152.4 mm
Colour
White
Finish
Matte
Adhesive
Permanent
Perforation
Yes (Perforated)
Roll & packaging
Labels per roll
250
Rolls per case
16
Labels per case
4,000
Core inside diameter
1" / 25.4 mm
Roll outside diameter
3.5" / 88.9 mm
Wind direction
Wound Out
Media format
Roll
Printer fit — 1" core, 3.5" outer diameter. This is a desktop roll. It fits printers that take a 1″ core — Zebra ZD/GK series, Rollo, MUNBYN, TSC TDP and similar. On an industrial 3″ spindle it will spin freely unless you fit a core adapter.
Direct thermal — no ribbon. The printhead darkens the heat-sensitive facestock directly. Printed images fade with heat, sunlight and abrasion, so these suit shipping and short-life applications rather than asset tags.
Materials, adhesive performance, storage, shelf life and regulatory information are common to this
range and are documented on our
label materials & compliance page.
Need something not listed here? Contact us with your printer make and model
and we’ll confirm the right material before you order.
Check three things before you order
Core size & roll diameter
This is the most common cause of a wrong order. Industrial and table-top printers take 3" core rolls up to roughly 8" outer diameter. Desktop printers take 1" core rolls up to roughly 5" outer diameter. A 3" core roll will not fit a desktop printer, and a 1" core roll will spin freely on an industrial spindle.
This label: 1" core, 3.5" outer diameter
Label width
The label must be equal to or narrower than your printer’s maximum print width — a 4" printer will not feed a 4.5" label. If you are printing thermal transfer, your ribbon also needs to be at least as wide as the label.
This label: 4" × 6"
No ribbon required
These are direct thermal labels. The printhead darkens the heat-sensitive facestock directly, so there is no ribbon to buy and nothing to load — if you put these in a thermal transfer setup with a ribbon fitted, you will get faint or doubled print. Direct thermal print fades with heat, sunlight and abrasion, so it suits shipping labels and short-life applications rather than long-term asset tags.
This label: Direct thermal — no ribbon needed
Still not sure? Contact us with your printer make and model and we’ll confirm the right size and material before you buy.
Compatible Printers
This media fits 190 printer
models across
16
brands,
matched on roll width, core, roll diameter and ribbon fit — not on part numbers.
Don’t see your printer? Check the full printer list
— or ask us and we’ll confirm the right media before you order. We deliberately don’t
list printers that require the manufacturer’s own cartridges, such as DYMO LabelWriter and
Brady smart-cell models.
