Brother TD-4750TNWB Labels & Ribbons

The Brother TD-4750TNWB does both. In thermal transfer mode it prints through a ribbon for durable, long-life labels; in direct thermal mode it prints straight onto heat-sensitive stock with no ribbon at all, which is how most shipping labels are produced.

The Brother TD-4750TNWB takes thermal transfer ribbons up to 4.33" wide, up to 984 ft (300 m) long, on a 1" core, wound coated side out (CSO). Wax suits coated paper labels, wax-resin handles synthetics and heavier handling, and full resin is the choice for chemical, solvent and outdoor exposure.

The Brother TD-4750TNWB accepts media up to 4.4" wide, with a maximum print width of 4.16". Any narrower label will run as well, so long as the roll core and outside diameter also fit the media bay — width alone is not enough.

The Brother TD-4750TNWB takes rolls on 1" / 1.5" cores, with a maximum roll diameter of 5". A roll on a larger core will not seat on the spindle, and one over the diameter limit will not let the cover close.

Yes, and it is the constraint most often missed. The Brother TD-4750TNWB requires rolls wound face out (labels on the outside of the roll). Most stock rolls are wound face out, so a face-in printer needs media ordered specifically — the roll will physically load either way but will not print.

Three things stop a roll loading in this printer: the roll is over 5" in diameter; the core is not 1" / 1.5"; the roll is wound face in instead of face out. Label width is usually the first thing people check and the least likely culprit — core size is the common one.

Yes. Because the Brother TD-4750TNWB prints thermal transfer, it can image polypropylene, polyester and other synthetic facestocks that direct thermal printers cannot mark. Pair them with a wax-resin or full resin ribbon; wax will not anchor properly to a synthetic surface.

Yes — 4" × 6" sits inside this printer's media width, and it prints them as direct thermal with no ribbon, which is the standard setup for courier and marketplace labels.

Vantage Labels stocks blank thermal labels and printer ribbons that fit the Brother TD-4750TNWB, shipped from Canadian stock. Everything listed on this page has been checked against the printer's published media specifications — width, core, roll diameter and ribbon format — rather than matched on the printer's name.