cab XD4 Ribbons & Labels

The cab XD4 is thermal transfer only. It prints through a thermal ribbon onto label stock, giving print that resists heat, light and abrasion. It cannot print on direct thermal labels without a ribbon.

The cab XD4 takes thermal transfer ribbons up to 4.49" wide, up to 1,181 ft (360 m) long, on a 1" core, wound either coated side in or out. Wax suits coated paper labels, wax-resin handles synthetics and heavier handling, and full resin is the choice for chemical, solvent and outdoor exposure.

The cab XD4 accepts media up to 4.33" wide, with a maximum print width of 4.16". Any narrower label will run as well, so long as the roll core and outside diameter also fit the media bay — width alone is not enough.

The cab XD4 takes rolls on 1.5" / 3" cores, with a maximum roll diameter of 11.81". A roll on a larger core will not seat on the spindle, and one over the diameter limit will not let the cover close.

Yes — 4" × 6" sits inside this printer's media width. This model is thermal transfer, so pair 4×6 thermal transfer labels with a suitable ribbon rather than buying direct thermal stock.

Yes. The cab XD4 accepts fan-folded stacks as well as rolls. A fanfold box holds far more labels than a roll of equivalent footprint, so it is the cheaper way to run high volume — the trade-off is bench space behind the printer.

Yes — 3" cores are the industrial standard and the cab XD4 is built for them, which is what lets it hold the large-diameter rolls that keep reload stops down.

Vantage Labels stocks blank thermal labels and printer ribbons that fit the cab XD4, shipped from Canadian stock. Everything listed on this page has been checked against the printer's published media specifications — width, core, roll diameter and ribbon format — rather than matched on the printer's name.